BMW E36 Ackerman Steering Angle Adapters for Stock Arm

• The Ackerman angle is available in 2 positions for Drift or Race driving. To switch between each setting simply remove the adjuster from the adapter plate, rotate 180 degrees and re-install, not forgetting to adjust your toe accordingly.
• These adapters are milled on CNC machines, which ensures high quality finish and 100% matching of the adapter to the steering knuckle and pin ends.
• Adapters extend the spacing by 2cm per side. To obtain approximately 55 degrees of twist.

• 1x Front left wishbone adapter
• 1x Front right wishbone adapter
• 2x Ackerman adapter inserts
• 4x Fastening bolts
• Assembly instructions

Warnings:

• During installation the steering rod and rod end must be shortened by 1cm. The bodywork remains intact and requires no modification. (Some extreme offset wheels or very low cars may need work to clear wheel arches).
• The minimum internal diameter of the wheel to be mounted is 370mm. 
• Fitting by an experienced mechanic is strongly recommended. Destroy Or Die are not responsible for any damage caused due to incorrect fitting or assembly.
• Not for road use.
• International shipping rates exclude any import duties/taxes/fees payable by the customer directly to the shipper prior to the release of goods.

Additional Information:

• Brand: CNC71